
A Roku remote that will not connect is one of the most frustrating small problems in a home, because the television is right there and working, yet you cannot change the channel or open an app. The good news is that pairing a Roku remote is usually a quick job, and most pairing problems have a simple fix. This guide walks you through the steps for every type of Roku remote, so you can get back to watching in a few minutes.
Before you start, it helps to know which kind of Roku remote you have, because the pairing method depends on the model. Roku makes two main kinds of remote, the simple infrared remote and the voice remote that connects over Wi-Fi. The simple remote works by pointing it at the Roku device, while the voice remote pairs wirelessly and works even when it is not pointed at the screen. Knowing which one you hold makes the rest of this guide much easier to follow.
The simple infrared remote is the one that comes with most basic Roku players, and it has no pairing button and no voice button. It works as soon as you put batteries in it, because it sends infrared signals directly to the Roku box. If this kind of remote stops working, the problem is almost always the batteries or a blocked signal, not a pairing issue. Check the batteries first, and make sure nothing is sitting between the remote and the Roku device.
The Roku voice remote is the more common remote today, and it has a microphone button, a voice search button, and often shortcut buttons for popular streaming services. This remote pairs with your Roku over a wireless connection, and it needs to be paired before it will work. If you have just bought a new voice remote, or if your existing remote has lost its connection, the pairing steps below will get it working again.
The easiest way to pair a Roku voice remote is to use the pairing button inside the battery compartment. Remove the battery cover on the back of the remote and look for a small round button near the batteries. Press and hold that button for about five seconds, until the small light on the remote starts flashing. This flashing light means the remote is in pairing mode and is looking for your Roku device.
While the light is flashing, keep the remote close to your Roku device, ideally within a few feet, and wait for the pairing to complete. Your television screen should show a message saying that the remote is pairing, and then a confirmation when it succeeds. The whole process usually takes less than thirty seconds, and the light on the remote will stop flashing once the connection is made. If nothing happens after a minute, try pressing the pairing button again.
If your Roku is brand new and this is the first time you are setting it up, the television will guide you through pairing automatically. When you first plug in the Roku and connect it to your television, the setup screen will ask you to pair the remote, and it will show you where the pairing button is. Follow the on-screen instructions, and the remote will pair as part of the setup process. You do not need to do anything special, just keep the remote near the Roku and press the button when asked.
Sometimes the pairing button is hard to find, because it is small and sits inside the battery compartment where you might not expect it. On most Roku voice remotes, it is a small circular button on the side of the battery area, and you may need to look closely or use a light to spot it. On the rechargeable Roku Voice Remote Pro, the pairing button is on the back of the remote, near the bottom, and it is labelled clearly. Take your time finding it, because pressing the wrong thing will not help.
If your remote has no pairing button at all, it is an infrared remote, and it does not need pairing. In that case, your problem is not a pairing issue, and you should check the batteries and the line of sight to the Roku device. Replace the batteries with a fresh pair, point the remote directly at the Roku, and press a button. If it still does not respond, the remote itself may be faulty and need replacing.
Fresh batteries solve more remote problems than any other single fix, so always try new batteries before you assume the remote is broken. Remote controls use very little power, so batteries can seem fine in another device while being too weak for the remote. Use a brand-new pair of the correct size, usually AAA, and make sure they are inserted the right way round, with the positive and negative ends matching the markings in the compartment.
Restarting your Roku device is another simple step that fixes many pairing problems. Unplug the Roku from the power socket, wait for about ten seconds, and then plug it back in. When the Roku restarts, it will look for a paired remote, and you can try the pairing button again once the home screen appears. A restart clears temporary glitches in the wireless connection, and it costs nothing to try.
If you have the Roku mobile app on your phone, you can use it as a temporary remote while you sort out the physical one. The app has a remote control built in, and it connects to your Roku over your home Wi-Fi network. This is useful when the physical remote will not pair, because you can still use your television while you work through the fixes. The app also lets you restart the Roku from your phone, which is handy if you cannot reach the power cable.
The Roku mobile app can also help you pair a new remote, because it gives you a way to reach the Roku settings without the physical remote. Open the app, tap the remote icon, and use it to go to Settings, then Remotes and Devices, then Set Up a New Device. Follow the on-screen steps, and when the Roku asks you to press the pairing button on the new remote, do so. The app acts as a bridge that makes the whole process possible.
Wi-Fi interference can sometimes stop a voice remote from pairing, because the remote uses the same wireless band as your home network. If you have many devices connected to your Wi-Fi, or if your router is far from the television, the signal may be too weak for a stable pairing. Try moving the remote closer to the Roku, or restart your router to clear any congestion. A strong Wi-Fi signal helps both your streaming and your remote.
If you are pairing a replacement remote, you may need to unpair the old one first, especially if the old remote is still working and interfering. Go to Settings on your Roku, then Remotes and Devices, then Remotes, and you will see a list of remotes connected to your device. Select the old remote and choose the option to forget it, then pair the new one. This step is rarely needed, but it helps when a Roku is confused by two remotes at once.
The Roku Voice Remote Pro has a rechargeable battery and a few extra features, and pairing it works the same way as the standard voice remote. Press and hold the pairing button on the back for five seconds until the light flashes, then wait for the television to confirm. If the remote has not been charged, plug it in with a USB cable for a while first, because a flat battery will not pair at all. The remote takes a few hours to fully charge, but it should have enough power to pair after a short charge.
Lost remote finder is a feature on the Voice Remote Pro that helps you find a remote that has slipped down the side of the sofa. You can trigger it from the Roku mobile app or by saying a voice command to another Roku device, and the remote will play a sound until you find it. This does not help with pairing, but it is worth knowing about, because a lost remote is often mistaken for a broken one. Check the sofa before you buy a replacement.
If you have tried everything and the remote still will not pair, the problem may be with the Roku device itself. Check that the Roku is running the latest software by going to Settings, then System, then System Update, using the mobile app remote if needed. An outdated Roku can refuse to pair with a newer remote, and updating the software often fixes it. After the update, restart the Roku and try pairing again.
Factory resetting the Roku is a last resort, because it erases all of your settings and accounts, and you will need to set everything up again. Only try this if no other fix has worked and you are sure the remote is good. You can reset from Settings, then System, then Advanced System Settings, then Factory Reset, or by pressing the small reset button on the Roku device itself. After the reset, the Roku will ask you to pair a remote as part of the setup, so have the remote and fresh batteries ready.
Buying a replacement remote is simple if your old one is truly broken, and you have a choice between an official Roku remote and a cheaper universal remote. Official Roku remotes are guaranteed to work with your model, and you can check compatibility on the Roku website before you buy. Universal remotes can work too, but they may not support voice search or the shortcut buttons, so read the packaging carefully before you choose.
When you buy a replacement, make sure it matches your Roku model, because not every Roku remote works with every Roku device. The Roku website has a compatibility checker, and most shops list the supported models on the box. A remote designed for a Roku Streaming Stick may not work with a Roku Express, so check before you pay. Getting the right model saves you a return trip to the shop.
Once your remote is paired, you can test it by pressing the home button and checking that the Roku responds immediately. Try the volume buttons, the navigation arrows, and the voice search to make sure everything works. If some buttons work and others do not, the remote may be faulty, but if nothing works at all, the pairing probably did not complete, and you should try again. A fully paired remote responds quickly to every button press.
Keeping your remote working well is easy with a few small habits. Replace the batteries as soon as the remote starts to feel sluggish, because weak batteries cause missed button presses before they die completely. Keep the remote away from water and direct sunlight, and avoid dropping it, because the wireless chip inside is delicate. A remote that is looked after will last for years without any pairing trouble.
To sum up, pairing a Roku remote is a short job once you know which kind of remote you have and where the pairing button lives. Hold the button for five seconds, wait for the flashing light, and let the Roku confirm the connection. If it does not work first time, try fresh batteries, restart the Roku, and use the mobile app as a backup remote while you try again. With a little patience, your remote will be paired and your television will be back under your control.

Related: How to Get the Windows Video Editor
If you enjoy setting up home entertainment, you may also like editing your own videos on your computer. The Windows video editor is a free tool that comes with Windows, and it is a good place to start if you want to trim clips, add titles, or put together a simple film from your own footage.

Related: How to Record Screen on iPhone
Recording your iPhone screen is useful when you want to show someone a problem with an app or save a moment from a game. The built-in recorder is quick to enable and saves directly to your photos, so it is always ready when you need to capture what is on your screen.
A paired remote makes the whole Roku experience feel effortless, because every button does what you expect. Once the pairing is done, you can sit back and enjoy your shows without thinking about the remote at all.
