Changing an IP address on a Windows 11 PC may sound like a job reserved for network administrators, but it doesn’t have to be complicated. If you’ve ever wondered how to change IP address Windows 11, you’re in the right place.
Whether you’re troubleshooting a network problem, configuring a home or office network, avoiding an IP conflict, or setting a specific local IP address for a device, Windows 11 gives you several ways to modify your IP configuration.
But here’s the important part: not all IP addresses work the same way.
Your computer can have a private IP address assigned by your router, while websites see a separate public IP address assigned by your internet service provider (ISP). Changing one doesn’t necessarily change the other.
In this guide, we’ll explain the difference between public and private IP addresses and show you several practical ways to change your IP address in Windows 11—including using Settings, Command Prompt, and your router. We’ll also cover DHCP, static IP addresses, VPNs, troubleshooting, and common mistakes.
Let’s get started.
Quick Summary: How to Change Your IP Address in Windows 11
Here are the main methods covered in this guide:
| Method | What It Changes | Best For | Difficulty |
|---|---|---|---|
| Windows Settings | Local/private IP configuration | Beginners | Easy |
| DHCP release and renew | Locally assigned IP | Troubleshooting | Easy |
| Command Prompt | Network configuration | Advanced users | Medium |
| Router restart | Usually your public/WAN connection | Getting a new ISP-assigned IP | Easy |
| VPN | Public IP visible to websites | Changing your apparent online IP | Easy |
| Static IP | Fixed local IP | Printers, servers, gaming, networking | Medium |
Key takeaway: If you simply want to change the IP address assigned to your Windows 11 computer by your router, the easiest approach is usually Settings > Network & internet > your connection > IP assignment > Edit. Microsoft recommends DHCP for most users because the router automatically manages IP addresses.
What Is an IP Address?
An IP address is essentially an address for a device on a network.
Think of your home network as an apartment building. Your router is the building manager, and each connected device—your laptop, phone, smart TV, or printer—gets its own apartment number.
That number helps network traffic reach the correct device.
An IP address typically looks something like:
192.168.1.25
For modern networks, you may also encounter IPv6 addresses, which look considerably different and contain hexadecimal characters.
IP addresses allow devices to communicate with one another and access network resources.
Public IP vs. Private IP: What’s the Difference?
Before you change anything, you need to know which IP address you actually want to change.
What Is a Private IP Address?
A private IP address is assigned to your device inside a local network.
For example:
192.168.1.25192.168.0.1510.0.0.20172.16.0.50
Your router typically assigns this address using DHCP.
Microsoft’s Windows 11 network settings let you view the IPv4 address associated with your Wi-Fi or Ethernet connection.
What Is a Public IP Address?
Your public IP address identifies your network to the wider internet.
Your ISP typically provides it to your router.
For example, your computer might have:
192.168.1.25
while your router has a public address such as:
203.0.113.50
These are completely different addresses.
Why Does This Matter?
If you manually change your Windows 11 private IP address, websites will generally not see that new private address.
So, if your goal is to change the IP address that websites see, manually editing Windows’ IPv4 settings isn’t the solution.
You’ll generally need something such as a VPN, a different network connection, or an ISP/router change.
Why Would You Want to Change Your IP Address?
There are several legitimate reasons.
You might need to change your local IP address because:
- Two devices have an IP conflict.
- You’re configuring a printer.
- You’re setting up a local server.
- Your router assigned an unsuitable address.
- You’re configuring port forwarding.
- You’re troubleshooting connectivity.
- You need a static address for a particular device.
- You’re setting up a home or office network.
You might want to change your public-facing IP because:
- You’re troubleshooting ISP connectivity.
- Your ISP assigns a dynamic address.
- You’re connecting through another network.
- You’re using a VPN for privacy or network-routing purposes.
The correct method depends on your goal.
How to Change IP Address Windows 11 Using Settings
For most beginners, this is the simplest method.
Windows 11 provides an IP assignment setting where you can choose between automatic DHCP configuration and manual IP configuration.
Step 1: Open Windows 11 Network Settings
Press:
Windows + I
to open Settings.
Then select:
Network & internet
You’ll see options such as:
- Wi-Fi
- Ethernet
- VPN
- Mobile hotspot
- Proxy
- Advanced network settings
Choose the connection you’re currently using.
Step 2: Select Wi-Fi or Ethernet
If you’re connected wirelessly, select:
Wi-Fi
Then select the Wi-Fi network you’re connected to.
If you’re using a network cable, select:
Ethernet
Microsoft’s current Windows 11 instructions use these connection-specific pages to access IP configuration.
Step 3: Find the IP Assignment Setting
Look for:
IP assignment
Then select:
Edit
Windows will display an Edit IP settings window.
You’ll usually see an option similar to:
Automatic (DHCP)
or
Manual
DHCP is the normal choice for most home users because the router automatically supplies the IP configuration.
Step 4: Change IP Assignment From Automatic to Manual
Select:
Manual
Then enable:
IPv4
You’ll now see fields for your network configuration.
Depending on your Windows 11 build and connection, these can include:
- IP address
- Subnet mask
- Gateway
- Preferred DNS
- Alternate DNS
- DNS over HTTPS settings
Microsoft documents manual IPv4 configuration using an IP address, subnet mask, gateway, and DNS server information.
Step 5: Enter a New IPv4 Address
Suppose your router uses the common local network:
192.168.1.x
Your computer might currently have:
192.168.1.20
You could potentially configure another unused address such as:
192.168.1.50
However, don’t randomly choose an IP address.
Your new address must belong to the correct network and must not already be assigned to another device.
For example, a configuration might look like:
| Setting | Example |
|---|---|
| IP address | 192.168.1.50 |
| Subnet mask | 255.255.255.0 |
| Gateway | 192.168.1.1 |
| Preferred DNS | Your preferred DNS server |
| Alternate DNS | Optional secondary DNS server |
These are examples—not universal values.
Your actual network may use a different address range.
Step 6: Enter the Subnet Mask and Gateway
The subnet mask tells Windows which addresses belong to the local network.
A common IPv4 subnet mask is:
255.255.255.0
The gateway is usually your router’s local IP address.
A common example is:
192.168.1.1
But your router might instead use:
192.168.0.1
or another address.
If you’re unsure, don’t guess.
Use Command Prompt to identify your current configuration before changing anything.
Step 7: Configure DNS If Necessary
Windows also allows you to manually specify DNS servers.
DNS translates human-readable domain names such as websites into IP addresses.
For example:
example.com
is resolved to an IP address by DNS.
Changing DNS is not the same thing as changing your IP address.
That’s an important distinction.
You can manually change DNS while keeping the same local IP address.
If you don’t specifically need custom DNS settings, leave them configured appropriately for your network.
Step 8: Save the New Configuration
After entering the required information, select:
Save
Windows will apply the new network configuration.
Your internet connection may briefly disconnect while the settings change.
If everything is correct, the connection should return shortly.
How to Find Your Current IP Address in Windows 11
Before changing anything, it’s smart to write down your existing configuration.
Why?
Because if the new settings don’t work, you can compare them with the old values or switch back to DHCP.
Method 1: Use Windows Settings
Go to:
Settings > Network & internet
Select:
- Wi-Fi and your connected network, or
- Ethernet
Look for the network properties.
Windows displays information including the IPv4 address.
Method 2: Use Command Prompt
Press the Start button and search for:
Command Prompt
Open it and type:
ipconfig
Then press Enter.
Look for your active adapter.
You’ll see information such as:
IPv4 Address
Subnet Mask
Default Gateway
For example:
IPv4 Address. . . . . . . . . . : 192.168.1.25
Subnet Mask . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . : 192.168.1.1
Your actual values will probably be different.
How to Change IP Address Windows 11 With Command Prompt
If you’re comfortable with commands, Windows provides another option.
Command Prompt can be useful when troubleshooting or managing network settings.
Step 1: Open Command Prompt as Administrator
Search for:
Command Prompt
Right-click it and choose:
Run as administrator
Select Yes if Windows asks for permission.
Step 2: Check Your Network Adapter Name
Run:
netsh interface ipv4 show config
This can help you identify your interface and current IPv4 configuration.
You may see an adapter such as:
- Wi-Fi
- Ethernet
The exact interface name depends on your computer.
Step 3: Configure a Static IP
A typical netsh command can look like:
netsh interface ipv4 set address name="Wi-Fi" static 192.168.1.50 255.255.255.0 192.168.1.1
This example tells Windows to assign:
- IP:
192.168.1.50 - Subnet mask:
255.255.255.0 - Gateway:
192.168.1.1
Do not copy these values blindly.
They are examples only. Your network may use completely different values.
A wrong gateway or incompatible IP address can disconnect your computer from the network.
How to Switch Back to Automatic IP in Windows 11
What if the manual IP doesn’t work?
Don’t panic.
You can return Windows to DHCP.
Go to:
Settings > Network & internet > Wi-Fi/Ethernet > IP assignment > Edit
Change:
Manual
to:
Automatic (DHCP)
Then save.
Microsoft recommends DHCP for most users because your router or access point automatically handles the IP address and DNS configuration.
This is often the safest option if you don’t specifically need a static IP.
How to Change Your IP Address Using DHCP
Sometimes you don’t need to manually select an address at all.
You can ask the DHCP server to release your current IP configuration and request another one.
Step 1: Open Command Prompt as Administrator
Search for Command Prompt.
Choose:
Run as administrator
Step 2: Release the Current IP Address
Run:
ipconfig /release
Press Enter.
Your network connection may temporarily lose connectivity.
Step 3: Request a New IP Address
Run:
ipconfig /renew
Press Enter.
Windows will request an IP configuration from the DHCP server.
Microsoft specifically recommends ipconfig /release followed by ipconfig /renew as troubleshooting steps for network connection problems.
Step 4: Verify the Result
Run:
ipconfig
Look for the IPv4 address.
Did it change?
Maybe.
And that’s the important point: DHCP renewal doesn’t guarantee a different IP address.
Your router may simply give your computer the same address again.
Why Didn’t My IP Address Change After ipconfig /renew?
This is one of the most common questions.
Imagine a hotel receptionist assigning rooms.
You check out of room 205 and immediately ask for another room. If room 205 is still the best available room, the receptionist may simply give it back to you.
DHCP can work similarly.
Your router controls the address pool and may decide to assign your computer the same IP address again.
So:
ipconfig /release
ipconfig /renew
means request a new DHCP configuration, not necessarily force a different IP address.
How to Change Your Public IP Address in Windows 11
Here’s where many people get confused.
Changing the private IP in Windows does not normally change the public IP that websites see.
Your public IP is generally associated with your internet connection and router—not simply with Windows’ local network settings.
Method 1: Restart Your Router
If your ISP uses dynamic public IP assignment, restarting your router may result in a different public IP.
However, there is no guarantee.
Your ISP may assign the same address again.
Method 2: Connect Through a Different Network
Connecting your Windows 11 computer to another internet connection—such as a different Wi-Fi network or a mobile hotspot—will generally put you behind that network’s public IP.
Method 3: Use a VPN
A VPN can route your internet traffic through a VPN server, making websites generally see the VPN server’s public IP instead of your home connection’s public IP.
This is fundamentally different from manually changing your Windows private IP.
Can You Change Your IP Address Without a VPN?
Yes—but it depends on which IP address you mean.
For your private IP:
Yes.
You can manually configure your local IPv4 address or use DHCP.
For your public IP:
Possibly, depending on your ISP and connection.
You might get a different public IP by:
- Restarting the router
- Reconnecting through another network
- Using a different ISP connection
- Using a VPN
But manually entering 192.168.1.50 in Windows does not magically change the public IP seen by websites.
Static IP vs. Dynamic IP: Which One Should You Use?
Understanding static and dynamic addressing makes IP configuration much easier.
| Feature | Static IP | Dynamic IP |
|---|---|---|
| Assignment | Manual | DHCP |
| Can change automatically? | Usually no | Yes |
| Easy for beginners? | Less so | Yes |
| Useful for servers | Yes | Sometimes |
| Useful for ordinary browsing | Usually unnecessary | Yes |
| Requires network planning | Often | Minimal |
For normal home internet use, DHCP is usually the easiest option.
A static IP becomes more useful when a device needs a predictable address.
Examples include:
- Network printers
- Local servers
- NAS devices
- Home automation systems
- Certain gaming/networking configurations
- Business infrastructure
What Is an IP Conflict and How Do You Fix It?
An IP conflict happens when two devices attempt to use the same IP address on the same network.
Imagine two houses having the exact same street address. Mail delivery becomes confusing.
Networks experience a similar problem.
Symptoms can include:
- No internet access
- Intermittent connectivity
- Network warnings
- Devices disappearing from the network
- Difficulty accessing local resources
How to Fix an IP Conflict
The easiest solution is often to return the affected device to DHCP.
Go to:
Settings > Network & internet > your connection > IP assignment > Edit
Choose:
Automatic (DHCP)
Then save.
You can also try:
ipconfig /release
ipconfig /renew
Microsoft recommends these commands as part of its Windows network troubleshooting process.
How to Verify That Your IP Address Changed
After changing your configuration, verify it rather than assuming it worked.
Check Through Settings
Open:
Settings > Network & internet
Select your active connection and view the network properties.
Look for:
IPv4 address
Check With Command Prompt
Run:
ipconfig
Compare the new IPv4 address with the old one.
You can also use:
ipconfig /all
This provides additional network information.
Look for:
- IPv4 address
- Subnet mask
- Default gateway
- DHCP status
- DNS servers
- Network adapter information
What If the New IP Address Breaks My Internet?
This usually means one or more network settings don’t match your router’s network.
For example, suppose your router uses:
192.168.1.1
but you manually configure your PC with an incompatible network such as:
192.168.50.25
Your computer may no longer communicate properly with the router.
The Quick Fix
Return to DHCP:
Settings > Network & internet > Wi-Fi/Ethernet > IP assignment > Edit > Automatic (DHCP)
Save the setting and reconnect.
If the connection still doesn’t work, restart Windows and your router.
How to Reset Network Settings in Windows 11
If network configuration becomes messy, Windows 11 includes a Network reset option.
Go to:
Settings > Network & internet > Advanced network settings > Network reset
Then choose:
Reset now
Microsoft describes Network reset as a later troubleshooting step because it removes installed network adapters and their settings and reinstalls the adapters after restarting.
Important: Don’t Use Network Reset Too Quickly
Network reset is more aggressive than changing an IP address.
It can affect:
- Network adapters
- Saved network configurations
- VPN software
- Virtual switches
- Other networking software
Microsoft notes that VPN clients and Hyper-V virtual switches may need to be reconfigured after a network reset.
So think of Network reset as a last-resort cleanup tool, not the first step.
How to Troubleshoot IP Problems in Windows 11
If changing the IP didn’t solve your problem, try these steps.
1. Restart Your Network Connection
Turn Wi-Fi off and back on.
Or disconnect and reconnect your Ethernet cable.
2. Restart Your Router
Power it off, wait briefly, and restart it.
Allow it time to reconnect to your ISP.
3. Renew the DHCP Configuration
Run:
ipconfig /release
ipconfig /renew
4. Flush the DNS Cache
Run:
ipconfig /flushdns
Microsoft includes DNS cache flushing among its Windows network troubleshooting commands.
5. Reset the TCP/IP Stack
Microsoft also recommends these commands in its network troubleshooting guidance:
netsh winsock reset
netsh int ip reset
Then restart the PC if Windows prompts you or if connectivity remains problematic.
What Does a 169.254.x.x IP Address Mean?
If Windows gives your computer an address beginning with:
169.254.x.x
that’s an important clue.
It generally indicates that Windows couldn’t obtain a proper IP address from the DHCP server.
Microsoft specifically identifies a 169.254.x.x address as an indication that Windows wasn’t able to get an IP address from the router.
In that situation, check:
- Wi-Fi connection
- Ethernet cable
- Router status
- DHCP settings
- Network adapter
- Router restart
- Network troubleshooting commands
Common Mistakes When Changing an IP Address
Changing an IP address is easy when you understand the basics, but several mistakes can cause unnecessary problems.
Mistake 1: Confusing Public and Private IP Addresses
Changing your Windows local IP doesn’t necessarily change your public IP.
These are two different things.
Mistake 2: Choosing a Random Static IP
Don’t simply type a random address into the IP field.
The address needs to match your local network’s configuration.
Mistake 3: Forgetting the Gateway
A computer may have a valid-looking IP address but still fail to reach the internet if the gateway is incorrect.
Mistake 4: Using an Address Already Assigned to Another Device
This can create an IP conflict.
Mistake 5: Changing DNS When You Only Need to Change IP
DNS and IP addressing are related networking concepts, but they aren’t interchangeable.
Mistake 6: Resetting Everything Immediately
Network reset can be useful, but it should generally be considered after simpler troubleshooting steps.
When Should You Use a Static IP Address?
A static local IP can make sense when you need a device to remain at a predictable address.
For example, suppose you run a home media server at:
192.168.1.50
If that address changes every few days, other devices may have trouble finding the server.
A consistent local address can make network management easier.
Static addressing can also be useful for:
- Printers
- NAS devices
- Security cameras
- Servers
- Home automation
- Development environments
- Certain port-forwarding setups
For an ordinary laptop used mainly for web browsing, email, streaming, and everyday work, DHCP is usually simpler.
Should You Change Your IP Address for Privacy?
Changing your local IP address isn’t a privacy solution by itself.
Your private address is generally not what ordinary websites see.
If your goal is online privacy, think about the entire connection path rather than just the local address.
For example:
Windows PC → Router → ISP → Internet
Changing the PC’s private IP changes the first part of that chain.
It doesn’t automatically hide your public internet address from websites.
A VPN works differently because it can route traffic through another network endpoint.
Can Changing Your IP Improve Internet Speed?
Usually, no.
Changing your local IP address doesn’t inherently make your internet connection faster.
If you’re experiencing slow speeds, investigate:
- Wi-Fi signal strength
- Router performance
- Network congestion
- ISP performance
- DNS behavior
- Background downloads
- Ethernet vs. Wi-Fi
- Network adapter drivers
An IP address is an identifier for network communication. It isn’t normally a speed-control setting.
Frequently Asked Questions About Changing IP Address in Windows 11
1. How do I change my IP address in Windows 11?
Go to Settings > Network & internet, select Wi-Fi or Ethernet, find IP assignment, select Edit, and choose Manual to enter a custom IPv4 configuration. For most users, Microsoft recommends leaving IP assignment on Automatic (DHCP) unless a manual configuration is necessary.
2. How do I change my IP address using Command Prompt?
You can use commands such as ipconfig /release and ipconfig /renew to release and request DHCP configuration. For static configurations, Windows also provides netsh interface ipv4 commands.
3. Will restarting my router change my public IP?
It can, particularly when your ISP uses dynamic addressing, but it isn’t guaranteed. Your ISP may assign the same public IP again.
4. Does changing my Windows 11 IP change my public IP?
Usually, no. A manually configured Windows IP is normally your private/local IP. Your public IP is associated with your internet connection and is generally assigned through your ISP.
5. What should I do if changing the IP disconnects my internet?
Return the connection to Automatic (DHCP). If problems continue, restart the router and PC, then try ipconfig /release and ipconfig /renew. Microsoft also recommends additional network reset commands when basic troubleshooting doesn’t solve the issue.
Final Takeaways: Changing an IP Address in Windows 11
Learning how to change IP address Windows 11 becomes much easier once you understand the difference between a private IP and a public IP.
For most users, the process is straightforward:
- Open Settings.
- Select Network & internet.
- Choose Wi-Fi or Ethernet.
- Find IP assignment.
- Select Edit.
- Choose Manual if you need a specific IP.
- Enable IPv4.
- Enter the correct IP address, subnet mask, and gateway.
- Save the configuration.
- Verify the new address with
ipconfig.
If you don’t specifically need a static address, Automatic (DHCP) is generally the easiest and safest choice because your router handles the configuration automatically.
If your goal is simply to obtain a different local IP, try DHCP release and renewal first. If you want to change the public IP that websites see, remember that manually changing your Windows private IP won’t accomplish that; your router, ISP, another network, or a VPN may be involved.
And here’s one final tip: always record your original network settings before making manual changes. Think of it as taking a photo of the map before exploring a new route. If something goes wrong, you know exactly where you started.
If you’d like, I can also turn this into a more aggressively SEO-focused version with a meta title, meta description, slug, keyword cluster, featured-snippet answers, schema-ready FAQs, and an SEO content outline.