Accidentally dropped your iPad in water? Don’t panic—but act quickly. Knowing how to get water out of iPad can make the difference between a device that survives a spill and one that develops serious internal damage.
Whether your iPad was splashed, dropped into a sink, exposed to rain, or had a drink spilled over it, the first few minutes matter. Water can enter through the charging port, speakers, microphones, buttons, and other openings. Even if the iPad appears to work normally, moisture trapped inside can cause corrosion or electrical problems later.
In this guide, we’ll explain exactly what to do after water gets into an iPad, what not to do, how long you should let it dry, and when professional repair may be necessary.
Important: iPads are not designed to be waterproof. Treat any liquid exposure seriously, even if the device seems fine afterward.
What Should You Do Immediately After Your iPad Gets Wet?
The first priority is to remove the iPad from the liquid and stop using it.
Follow these steps immediately:
- Remove the iPad from the water.
- Disconnect any charging cable or accessories.
- Turn the iPad off.
- Remove the case, keyboard, or other accessories.
- Gently wipe away visible water.
- Position the iPad so liquid can drain naturally.
- Leave it in a dry, well-ventilated location.
- Do not charge it until you’re confident it is completely dry.
The biggest mistake is continuing to use the device because it appears to work.
Water and electricity are a dangerous combination for electronics. Your iPad may continue functioning for a while and then develop problems later.
Step 1: Remove the iPad From the Water
If your iPad is currently in water, remove it immediately.
Don’t spend time checking whether the screen works or trying to unlock it.
The longer the device remains submerged, the greater the opportunity for liquid to enter internal components.
After removing it, hold the iPad securely and move it away from the source of the water.
Step 2: Disconnect the Charger Immediately
If your iPad is connected to a charger, disconnect it as soon as you can do so safely.
Never continue charging an iPad that has been exposed to water.
The charging port is one of the areas where moisture can become trapped. Connecting a charging cable while the port is wet can potentially cause electrical problems.
If the cable itself is wet, set it aside and allow it to dry completely as well.
Step 3: Turn Off Your iPad
If your iPad is still powered on, shut it down.
The exact shutdown process can vary depending on the iPad model, but many modern iPads can be powered off by holding the appropriate button combination until the power-off slider appears.
Once the iPad is turned off, leave it off.
Why is turning it off important?
Electronic components can be damaged when electricity passes through areas contaminated by moisture.
Turning the device off reduces the chance of continued electrical activity while you’re dealing with the water exposure.
Step 4: Remove the iPad Case
If your iPad has a protective case, remove it.
Cases can trap moisture against the back and edges of the device.
Also remove:
- Keyboard cases
- Covers
- Stylus accessories
- External cables
- Adapters
- Other connected accessories
Dry the accessories separately.
Don’t put the case back on until both the iPad and the case are completely dry.
Step 5: Wipe the Outside of the iPad
Use a clean, soft, lint-free cloth to gently wipe the exterior.
Pay particular attention to:
- Screen
- Back panel
- Edges
- Charging port area
- Speaker openings
- Microphone openings
- Buttons
- Camera area
Don’t aggressively rub the openings.
The goal is to remove surface moisture—not push liquid deeper into the device.
How to Get Water Out of the iPad Charging Port
The charging port deserves special attention because moisture can remain inside it.
Hold the iPad so the charging port is facing downward.
Gently tap or shake the device against your hand to encourage excess liquid to leave the port.
Don’t insert objects into the port.
Avoid using:
- Cotton swabs
- Paper towels
- Toothpicks
- Pins
- Needles
- Metal objects
These can damage delicate contacts or push moisture farther inside.
Allow the port to dry naturally in a location with good airflow.
Should You Shake an iPad to Get Water Out?
A gentle movement can help excess water leave an opening, but vigorous shaking is not recommended.
You don’t want to spread liquid throughout the device.
Instead, position the iPad strategically so gravity can help.
For example, if you suspect water entered the charging port, keeping that opening facing downward can allow droplets to move out naturally.
Think of it like draining a wet bottle: positioning matters more than force.
Should You Use a Hair Dryer on a Wet iPad?
No.
Using a hair dryer is one of the most common mistakes people make after getting electronics wet.
Even if you use the lowest setting, heated air can potentially:
- Overheat components
- Damage adhesives
- Affect the display
- Push moisture deeper inside
- Create uneven heating
Don’t use a heat gun either.
Your goal is gentle drying, not cooking the device.
Can You Use a Vacuum to Remove Water?
It’s better to avoid using a household vacuum directly against the iPad.
Strong suction isn’t a reliable way to remove internal moisture and may not reach water that has already moved inside the device.
Gentle airflow and natural evaporation are safer approaches.
Should You Put a Wet iPad in Rice?
You may have heard the classic advice:
“Put your wet phone or tablet in rice.”
It’s generally not a good idea.
Rice doesn’t magically pull internal moisture out of electronics, and small particles or dust from rice can potentially enter openings.
Instead of relying on rice, focus on:
- Turning the iPad off
- Disconnecting power
- Removing the case
- Wiping external moisture
- Allowing natural drying
- Providing gentle ventilation
- Getting professional help if the exposure was significant
Rice is not a substitute for proper drying or repair.
How Long Should You Let a Wet iPad Dry?
There isn’t one universal drying time.
It depends on factors such as:
- How much liquid reached the iPad
- Whether it was submerged
- Which openings were exposed
- The surrounding humidity
- Whether liquid entered the charging port
- Whether the device was powered on during exposure
For a minor surface spill, the exterior may dry relatively quickly.
However, if the iPad was submerged or you believe water entered the interior, do not assume that a dry-looking exterior means the inside is dry.
Giving the device plenty of time before attempting to power it on is safer than repeatedly checking it.
Keep the iPad in a Dry, Well-Ventilated Area
Place the iPad somewhere dry with normal room-temperature airflow.
Avoid:
- Direct sunlight
- Radiators
- Heaters
- Hair dryers
- Ovens
- Hot cars
- Other heat sources
A cool, dry environment with gentle airflow is preferable.
If you have a fan, indirect airflow can help improve evaporation.
Don’t point extremely strong airflow directly into ports.
Don’t Try to Turn It On Repeatedly
This is another important rule.
You might be tempted to press the power button every few minutes and ask:
“Is it working yet?”
Resist that temptation.
Every time you power on an electronics device while moisture may still be present, you potentially expose its components to electrical activity while wet.
Give it time.
Don’t Connect the iPad to a Computer
You should also avoid connecting a wet iPad to:
- A Mac
- A Windows PC
- A USB hub
- A docking station
- An external monitor
- A charger
- Other USB accessories
Wait until you’re confident the iPad and its ports are completely dry.
What If Water Got Into the Speakers?
Water entering the speaker openings can cause muffled, distorted, or unusually quiet audio.
You may notice:
- Crackling
- Reduced volume
- Distortion
- A buzzing sound
- Audio that sounds “underwater”
Don’t insert anything into the speaker openings.
Allow the device to dry naturally.
If the sound remains distorted after the iPad has completely dried, professional inspection may be appropriate.
What If the iPad Screen Gets Wet?
If water is only on the screen surface, gently wipe it with a soft, lint-free cloth.
Avoid spraying cleaning products directly onto the display.
If moisture appears to be under the screen, that’s a different situation.
Visible moisture beneath the display can indicate that liquid has entered the device.
In that situation, don’t try to press, heat, or pry the display.
Professional service is the safer option.
What If Water Got Into the Charging Port?
This situation deserves extra caution.
A wet charging port can potentially cause charging problems or electrical issues.
If you suspect the port is wet:
- Disconnect the charger.
- Turn off the iPad.
- Hold the charging port downward.
- Gently tap the iPad against your hand to remove excess liquid.
- Leave it in a dry, ventilated place.
- Don’t insert anything into the port.
- Don’t reconnect the charger until the port is completely dry.
If the iPad later displays a moisture warning when you connect a cable, disconnect the cable and allow additional drying time.
What If You Dropped the iPad in Salt Water?
Salt water is more concerning than ordinary fresh water.
Why?
Because salt and other dissolved substances can remain behind after water evaporates and contribute to corrosion.
The same concern applies to:
- Seawater
- Swimming pool water
- Soft drinks
- Coffee
- Juice
- Milk
- Other beverages
If the iPad was submerged in anything other than clean water, professional inspection becomes especially important.
Even if the iPad starts working again, residue may remain inside.
What If You Spilled Coffee or Soda on an iPad?
Don’t treat sticky drinks exactly like clean water.
Coffee, soda, juice, and similar liquids can leave residues.
Those residues may affect:
- Charging contacts
- Buttons
- Speakers
- Internal connectors
- Other components
Immediately disconnect power and turn the iPad off.
Wipe the exterior gently and avoid powering it back on repeatedly.
For a significant spill, professional cleaning and inspection may be necessary.
What Happens if You Turn On a Wet iPad?
The outcome varies.
Sometimes the iPad may continue working normally.
Other times, you might experience:
- Screen problems
- Touchscreen issues
- Charging failure
- Speaker distortion
- Random restarts
- Battery problems
- Wi-Fi or Bluetooth problems
- Camera issues
- Button problems
- Complete failure
One of the frustrating things about liquid damage is that symptoms don’t always appear immediately.
An iPad can appear fine initially and develop problems later because corrosion takes time to affect components.
Signs Your iPad May Have Internal Water Damage
After the device has had adequate time to dry, watch for unusual behavior.
Possible warning signs include:
1. The Screen Flickers
Flickering or unusual display behavior can indicate hardware damage.
2. Touch Doesn’t Work Properly
If certain areas stop responding, moisture or damage may be involved.
3. The iPad Won’t Charge
A damaged or contaminated charging port can prevent normal charging.
4. Speakers Sound Distorted
Water exposure around the speaker openings can affect audio.
5. The Camera Becomes Foggy
Condensation inside or around the camera area can indicate moisture.
6. Buttons Stop Responding
Liquid can affect buttons and their internal components.
7. The iPad Randomly Restarts
Unexpected restarts may indicate an underlying hardware issue.
8. The Device Gets Unusually Hot
If the iPad becomes abnormally hot after liquid exposure, stop using it and seek professional assistance.
When Should You Take Your iPad to a Repair Professional?
Consider professional inspection if:
- The iPad was completely submerged.
- It was underwater for more than a brief moment.
- A large amount of liquid was spilled on it.
- The liquid was salt water.
- The liquid was soda, coffee, juice, or another non-water beverage.
- You see condensation inside the display or camera.
- The iPad won’t turn on.
- The iPad won’t charge.
- The screen behaves strangely.
- The device becomes unusually hot.
- Audio remains distorted.
- Problems continue after drying.
A professional can determine whether internal components have been affected.
Should You Open the iPad Yourself?
For most users, no.
Modern iPads are not designed to be casually opened at home.
Opening one can create additional problems, including damage to:
- The display
- Adhesive seals
- Internal cables
- Battery
- Connectors
- Other components
If you don’t have the appropriate repair tools and experience, DIY disassembly can turn liquid damage into additional physical damage.
How to Protect Your iPad From Future Water Damage
The best way to deal with water damage is to prevent it.
Consider these habits:
Keep Drinks Away From Your iPad
Don’t place a glass directly beside the device.
One accidental elbow movement can turn a safe desk into a disaster.
Use a Protective Case
A quality case can help protect against splashes and everyday accidents, although you should never assume a normal case makes an iPad waterproof.
Avoid Using Your iPad Near Water
Be particularly careful around:
- Swimming pools
- Bathtubs
- Sinks
- Beaches
- Wet kitchens
- Rain
- Boats
Keep Your Charging Area Dry
Never charge your iPad beside an active water source.
How to Back Up Your iPad Before an Accident Happens
Water damage isn’t the only threat to your data.
A good backup strategy can protect your photos, contacts, documents, notes, and other important information if your iPad suddenly stops working.
Depending on your setup, you may use cloud synchronization or create backups through a computer.
The key lesson is simple:
Don’t wait for an accident before thinking about your data.
A backup is like a spare key. You hope you never need it, but you’ll be grateful to have it when something goes wrong.
Can a Water-Damaged iPad Be Saved?
Yes, sometimes.
The outcome depends heavily on the severity and type of liquid exposure.
A brief splash that remains mostly on the exterior is very different from an iPad that has been completely submerged.
Factors that influence the outcome include:
- Amount of liquid
- Exposure duration
- Liquid type
- Whether the device was powered on
- Whether it was charging
- Which internal components were affected
- How quickly the device was handled afterward
The most important immediate actions are to remove power, stop using the device, and allow it to dry safely.
A Simple Water-Damage Emergency Checklist
If you need a quick reference, save this checklist:
Do:
- Remove the iPad from the liquid.
- Disconnect the charger.
- Turn the iPad off.
- Remove the case.
- Wipe the exterior.
- Keep ports facing downward when appropriate.
- Allow natural drying.
- Use gentle, indirect airflow.
- Seek professional help for serious exposure.
Don’t:
- Don’t charge the iPad.
- Don’t repeatedly turn it on.
- Don’t use a hair dryer.
- Don’t use a heat gun.
- Don’t put it in an oven.
- Don’t bury it in rice.
- Don’t insert objects into ports.
- Don’t shake it aggressively.
- Don’t open the device unless you’re qualified to repair it.
Frequently Asked Questions
Can I use a hair dryer to dry my iPad?
It’s best to avoid hair dryers and other heat sources. Heat can damage electronic components and may push moisture farther into the device.
Does rice remove water from an iPad?
Rice isn’t a reliable solution for internal moisture and can introduce dust or particles into openings. Natural drying and professional inspection are safer approaches.
How long should I wait before turning on a wet iPad?
There isn’t a guaranteed universal time because liquid exposure varies. If the device was significantly wet or submerged, waiting longer and seeking professional inspection is safer than repeatedly powering it on.
What should I do if my iPad won’t turn on after getting wet?
Don’t repeatedly attempt to power it on or charge it. If it has had adequate drying time and still won’t start, professional repair or inspection is recommended.
Can water damage an iPad even if it still works?
Yes. Liquid can cause corrosion or damage that doesn’t become obvious immediately.
What if I spilled soda on my iPad?
Turn it off, disconnect power, wipe the exterior, and avoid charging it. Because soda can leave sticky residue, significant exposure may require professional cleaning or inspection.
What if my iPad fell into salt water?
Salt water can be particularly damaging because it can leave conductive and corrosive residue. Turn the device off, don’t charge it, and consider professional service as soon as possible.
Can I charge my iPad after it gets wet?
Don’t charge it while moisture may still be present. Make sure the charging port and device are completely dry first.
Can I put my iPad in direct sunlight?
It’s better to avoid direct sunlight and other strong heat sources. Use a dry, room-temperature environment with gentle ventilation instead.
Should I open my iPad to dry it?
Most users should not open an iPad themselves. Internal disassembly can cause additional damage, particularly around the display, battery, and internal connectors.
What if water got into the iPad speakers?
Don’t insert anything into the speaker openings. Allow the device to dry naturally. Persistent distortion after drying may require professional inspection.
Is an iPad waterproof?
You should not treat an iPad as waterproof. Liquid exposure can damage internal components even when the exterior appears fine.
Final Thoughts
Knowing how to get water out of iPad can help you respond correctly during a stressful accident.
The most important thing is not to panic and start experimenting with heat, rice, charging cables, or aggressive shaking. Instead, think about the first few minutes as an emergency shutdown procedure.
Remove the iPad from the liquid, disconnect power, turn it off, remove the case, wipe the outside, and allow it to dry naturally in a well-ventilated area.
If the iPad was submerged, exposed to salt water or another liquid, or begins showing unusual symptoms, professional inspection is the safest next step.
And remember: an iPad that turns on after getting wet isn’t necessarily an iPad that’s completely safe. Hidden moisture and corrosion can cause problems later, so don’t ignore unusual behavior.
Key Takeaways
- Turn off your iPad as soon as possible after significant water exposure.
- Disconnect all chargers and accessories.
- Never charge an iPad while its charging port may be wet.
- Remove the protective case and wipe away surface moisture.
- Keep the charging port facing downward when appropriate.
- Use natural drying and gentle ventilation.
- Avoid hair dryers, heaters, ovens, and heat guns.
- Don’t rely on rice to dry the device.
- Don’t repeatedly power on a wet iPad.
- Salt water, soda, coffee, and other liquids can be more problematic than clean water.
- Seek professional help after significant submersion or if the iPad develops problems.
- Maintain regular backups so water damage doesn’t become a data-loss disaster.